Microsoft Word 2016 Error Message during launch

"We're sorry but this feature appears to be broken and needs to be repaired. Use the programs and features option in the windows control panel to repair Microsoft office"


The Error Message pop up everytime I start My Word 2016 which pretty anonying.

Tried Quick and Online Repair vis Control Panel didn't help. Was thinking of using Microsoft tools to completely remove Office Install and ReInstall then realised that it maybe cause by me testing the WPS Office by Kingsoft.

For those with Microsoft Office installed on your PC, try not to install WPS Office because it will screw up your settings like Office documents icon even though you uninstall the WPS Office.

To resolved the above, I used RegEdit and search for kingsoft and delete every key I can found in my Windows Registry. SOLVED.

Pebble Classic in Boot Loop

Stuck in boot loop after firmware upgrade? This become a repeated event for my Pebble Classic after I goes to vestion 3. Each firmware I will stuck in Boot Loop. Below what I used to recover from boot loop for version v3.11.1

Solutions below are from various forum and official Pebble support.

1. Delete any Bluetooth pairings on your phone
2. Reboot your phone
3. Delete ReInstall Pebble Apps
4. Press and hold BACK, UP and SELECT until the Pebble reboot (Reset / Recovery Mode). You need to hold for about 10 seconds untill you see the word Pebble + loading bar / progress bar.
5. Wait till pebble/app screen shown
   
   then press and hold the Down button (bottom right) until an animation of two spinning circles appears (approx. 7-10 seconds).
6. Wait for the animation to stop.
7. Open your phone's Bluetooth settings. If you see your Pebble listed, forget the device.
8. Open the Pebble app on your phone.
9. Tap the Connect prompt near the bottom of the app.
10. Once your Pebble updates, you'll be all set to go!

Partial Source: http://help.getpebble.com/customer/en/portal/articles/2002603-sos-screen-recovery-mode?b_id=8309

vPost Review

Just a quick review on vPost = if you are not Singapore customer, forget about it. Base Charge of US20.40 per package, insanely high. Not sure when the rules changed, no more consolidation for non Singaporean.

Decided to try it after they revamp the site, ended up pay a lot more. This will be my last transaction with them. HopShopGo will be recommended by be. BTW for those in Malaysia and wish to buy from TaoBao go checvk out zhopy.com

https://my.vpost.com/tips-faq/faq/charges-and-payment#Charges&Payment17

Recover UniFi PPPoE Password

Bought myself a replacement router for UniFi, here comes the problem. Where do I fond my unifi PPPoE login password?

Below a quick guide which I found after Google it.

First you need to enable Telnet if you are using the Windows 7.

1. Control Panel  -> Programs And Features –> Turn Windows features on or off
2. Check Telnet Client
3. Click OK

Next Telnet into the D-Link Router supplies by TM. If you don’t have the Super Admin (aka operator) password try followings.

Username : operator
Password : telekom

Username : operator
Password : h566UniFi

Username : operator
Password : <your Unifi username in reverse order>

BTW for those who don’t know how to use Telnet. Open a Command Prompt windows. Type Telnet 192.168.1.1 (the D-Link router IP). Once successful your will be prompt to enter user id and password.

Enter this command once you login.

cat /etc/ppp/chap-secrets

Source:
http://unifi.athena.my/router_security.php
http://wingloon.com/2011/03/15/recover-unifi-pppoe-password/